These tablets provide an easy way to maintain chlorine levels in your pool. Typically they will dissolve slowly over a 3 – 5 day period depending on application method, water flow and temperature.
Instructions
1. The pH level should be within the range 7.2 – 7.6, if the level is outside this range please adjust before proceeding.
2. Before applying this product the chlorine level in your pool must be between 1.5 – 3mg/l (ppm). If your chlorine level is below this, then shock dose the pool using Acti Rapid Shock Granules.
3. This product can be applied in one of three ways:
Skimmer Application
Place one 200g Chlorine Tablet in the skimmer per 45m3 (10,000 gallons) of pool water, adjust number of tablets placed in skimmer as necessary to maintain chlorine level of 1.5 – 3mg/l (ppm). Note: skimmer application is not recommended on any pools with heating
devices unless the filtration system is running continuously.
Floating Dispenser Application
Fill the dispenser with 200g Chlorine Tablets and regulate dose rate with the mechanism on the dispenser or by varying the quantity of tablets in the dispenser to maintain chlorine level of 1.5 – 3mg/l (ppm).
Chlorine Feeder Application
Place 200g Chlorine Tablets in the feeder and follow the feeder’s instruction manual on regulating the flow to maintain chlorine level of 1.5 – 3mg/l (ppm).