Acti Floc Liquid & Granules

Previous name: Acti Floc Liquid

Effective at any pH between 6.9 and 7.8.

In compliance with EN 15031: Chemical products used for treatment of swimming pool water.

Instructions for use

Private swimming pools

Acti Floc is used with the filtration system turned off and after it has dissolved in 10 litres of water; the solution obtained is then spread into the pool using a watering can.

Allow it to take effect at least overnight and then clean away any dirt from the bottom of the pool with a vacuum. Discharge it directly in the sewer.

Public swimming pools

Acti Floc must be injected and not diluted by a metering pump, before the sand filter, directly from the can or by means of a conditioning tank.

Dosage

Private swimming pools

• Curative: In the event of high cloudiness or after "shock chlorination", add 0.5 litres of Acti Floc for 30 m³ of water.
• Preventive: 0.2L for 50 m³ of water per week.

Communal swimming pools

Daily consumption varies according to the use and environment of the pool. It is between 0.5 and 1.0mL/m³ of recycled water for a covered pool and between 1.0 and 2.0mL/m³ of recycled water for an open-air pool

Packaging

1 Litre, 3 Litre, 5 Litre and 20 Litre container.